Linkerd

Linkerd 是一个面向云原生应用的 Service Mesh 组件,也是 CNCF 项目之一。它为服务间通信提供了一个统一的管理和控制平面,并且解耦了应用程序代码和通信机制,从而无需更改应用程序就可以可视化控制服务间的通信。linkerd 实例是无状态的,可以以每个应用一个实例 (sidecar) 或者每台 Node 一个实例的方式部署。

Linkerd 的主要特性包括

  • 服务发现
  • 动态请求路由
  • HTTP 代理集成,支持 HTTP、TLS、gRPC、HTTP/2 等
  • 感知时延的负载均衡,支持多种负载均衡算法,如 Power of Two Choices (P2C) Least Loaded、Power of Two Choices (P2C) peak ewma、Aperture: least loaded、Heap: least loaded、Round robin 等
  • 熔断机制,自动移除不健康的后端实例,包括 fail fast(只要连接失败就移除实例)和 failure accrual(超过 5 个请求处理失败时才将其标记为失效,并保留一定的恢复时间 )两种
  • 分布式跟踪和度量

Linkerd 原理

Linkerd 路由将请求处理分解为多个步骤

  • (1) IDENTIFICATION:为实际请求设置逻辑名字(即请求的目的服务),如默认将 HTTP 请求 GET http://example/hello 赋值名字 /svc/example
  • (2) BINDING:dtabs 负责将逻辑名与客户端名字绑定起来,客户端名字总是以 /#/$ 开头,比如
# 假设 dtab 为
/env => /#/io.l5d.serversets/discovery
/svc => /env/prod

# 那么服务名 / svc/users 将会绑定为
/svc/users
/env/prod/users
/#/io.l5d.serversets/discovery/prod/users
  • (3) RESOLUTION:namer 负责解析客户端名,并得到真实的服务地址(IP + 端口)
  • (4) LOAD BALANCING:根据负载均衡算法选择如何发送请求

Linkerd 部署

Linkerd 以 DaemonSet 的方式部署在每个 Node 节点上:

# Deploy linkerd.
# For CNI, deploy linkerd-cni.yml instead.
# kubectl apply -f https://github.com/linkerd/linkerd-examples/raw/master/k8s-daemonset/k8s/linkerd-cni.yml
kubectl create ns linkerd
kubectl apply -f https://raw.githubusercontent.com/linkerd/linkerd-examples/master/k8s-daemonset/k8s/servicemesh.yml

$ kubectl -n linkerd get pod
NAME        READY     STATUS    RESTARTS   AGE
l5d-6v67t   2/2       Running   0          2m
l5d-rn6v4   2/2       Running   0          2m
$ kubectl -n linkerd get svc
NAME      TYPE           CLUSTER-IP   EXTERNAL-IP     POR    AGE
l5d       LoadBalancer   10.0.71.9    <pending>       4140:32728/TCP,4141:31804/TCP,4240:31418/TCP,4241:30611/TCP,4340:31768/TCP,4341:30845/TCP,80:31144/TCP,8080:31115/TCP   3m

默认情况下,Linkerd 的 Dashboard 监听在每个容器实例的 9990 端口(注意未在 l5d 服务中对外暴露),可以通过服务的相应端口来访问。

kubectl -n linkerd port-forward $(kubectl -n linkerd get pod -l app=l5d -o jsonpath='{.items[0].metadata.name}') 9990 &
echo "open http://localhost:9990 in browser"

Grafana 和 Prometheus

$ kubectl -n linkerd apply -f https://github.com/linkerd/linkerd-viz/raw/master/k8s/linkerd-viz.yml
$ kubectl -n linkerd get svc linkerd-viz
NAME          TYPE           CLUSTER-IP    EXTERNAL-IP   PORT(S)                       AGE
linkerd-viz   LoadBalancer   10.0.235.21   <pending>     80:30895/TCP,9191:31145/TCP   24s

TLS

kubectl -n linkerd apply -f https://github.com/linkerd/linkerd-examples/raw/master/k8s-daemonset/k8s/certificates.yml
kubectl -n linkerd delete ds/l5d configmap/l5d-config
kubectl -n linkerd apply -f https://github.com/linkerd/linkerd-examples/raw/master/k8s-daemonset/k8s/linkerd-tls.yml

Zipkin

# Deploy zipkin.
kubectl -n linkerd apply -f https://github.com/linkerd/linkerd-examples/raw/master/k8s-daemonset/k8s/zipkin.yml

# Deploy linkerd for zipkin.
kubectl -n linkerd apply -f https://github.com/linkerd/linkerd-examples/raw/master/k8s-daemonset/k8s/linkerd-zipkin.yml

# Get zipkin endpoint.
ZIPKIN_LB=$(kubectl get svc zipkin -o jsonpath="{.status.loadBalancer.ingress[0].*}")
echo "open http://$ZIPKIN_LB in browser"

NAMERD

$ kubectl apply -f https://raw.githubusercontent.com/linkerd/linkerd-examples/master/k8s-daemonset/k8s/namerd.yml
$ kubectl apply -f https://raw.githubusercontent.com/linkerd/linkerd-examples/master/k8s-daemonset/k8s/linkerd-namerd.yml

$ go get -u github.com/linkerd/namerctl
$ go install github.com/linkerd/namerctl
$ NAMERD_INGRESS_LB=$(kubectl get svc namerd -o jsonpath="{.status.loadBalancer.ingress[0].*}")
$ export NAMERCTL_BASE_URL=http://$NAMERD_INGRESS_LB:4180
$ $ namerctl dtab get internal
# version MjgzNjk5NzI=
/srv         => /#/io.l5d.k8s/default/http ;
/host        => /srv ;
/tmp         => /srv ;
/svc         => /host ;
/host/world  => /srv/world-v1 ;

Ingress Controller

Linkerd 也可以作为 Kubernetes Ingress Controller 使用,注意下面的步骤将 Linkerd 部署到了 l5d-system namespace。

$ kubectl create ns l5d-system
$ kubectl apply -f https://raw.githubusercontent.com/linkerd/linkerd-examples/master/k8s-daemonset/k8s/linkerd-ingress-controller.yml -n l5d-system

# If load balancer is supported in kubernetes cluster
$ L5D_SVC_IP=$(kubectl get svc l5d -n l5d-system -o jsonpath="{.status.loadBalancer.ingress[0].*}")
$ echo open http://$L5D_SVC_IP:9990

# Or else
$ HOST_IP=$(kubectl get po -l app=l5d -n l5d-system -o jsonpath="{.items[0].status.hostIP}")
$ L5D_SVC_IP=$HOST_IP:$(kubectl get svc l5d -n l5d-system -o 'jsonpath={.spec.ports[0].nodePort}')
$ echo open http://$HOST_IP:$(kubectl get svc l5d -n l5d-system -o 'jsonpath={.spec.ports[1].nodePort}')

然后通过 kubernetes.io/ingress.class: "linkerd" annotation 使用 linkerd ingress 控制器:

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: hello-world
  annotations:
    kubernetes.io/ingress.class: "linkerd"
spec:
  backend:
    serviceName: world-v1
    servicePort: http
  rules:
  - host: world.v2
    http:
      paths:
      - backend:
          serviceName: world-v2
          servicePort: http

更多使用方法见这里

应用示例

可以通过 HTTP 代理和 linkerd-inject 等两种方式来使用 Linkerd。

HTTP 代理

应用程序在使用 Linkerd 时需要为应用设置 HTTP 代理,其中

  • HTTP 使用 $(NODE_NAME):4140
  • HTTP/2 使用 $(NODE_NAME):4240
  • gRPC 使用 $(NODE_NAME):4340

在 Kubernetes 中,可以使用 Downward API 来获取 NODE_NAME,比如

---
apiVersion: v1
kind: ReplicationController
metadata:
  name: hello
spec:
  replicas: 3
  selector:
    app: hello
  template:
    metadata:
      labels:
        app: hello
    spec:
      dnsPolicy: ClusterFirst
      containers:
      - name: service
        image: buoyantio/helloworld:0.1.6
        env:
        - name: NODE_NAME
          valueFrom:
            fieldRef:
              fieldPath: spec.nodeName
        - name: POD_IP
          valueFrom:
            fieldRef:
              fieldPath: status.podIP
        - name: http_proxy
          value: $(NODE_NAME):4140
        args:
        - "-addr=:7777"
        - "-text=Hello"
        - "-target=world"
        ports:
        - name: service
          containerPort: 7777
---
apiVersion: v1
kind: Service
metadata:
  name: hello
spec:
  selector:
    app: hello
  clusterIP: None
  ports:
  - name: http
    port: 7777
---
apiVersion: v1
kind: ReplicationController
metadata:
  name: world-v1
spec:
  replicas: 3
  selector:
    app: world-v1
  template:
    metadata:
      labels:
        app: world-v1
    spec:
      dnsPolicy: ClusterFirst
      containers:
      - name: service
        image: buoyantio/helloworld:0.1.6
        env:
        - name: POD_IP
          valueFrom:
            fieldRef:
              fieldPath: status.podIP
        - name: TARGET_WORLD
          value: world
        args:
        - "-addr=:7778"
        ports:
        - name: service
          containerPort: 7778
---
apiVersion: v1
kind: Service
metadata:
  name: world-v1
spec:
  selector:
    app: world-v1
  clusterIP: None
  ports:
  - name: http
    port: 7778

linkerd-inject

# install linkerd-inject
$ go get github.com/linkerd/linkerd-inject

# inject init container and deploy this config
$ kubectl apply -f <(linkerd-inject -f <your k8s config>.yml -linkerdPort 4140)

参考文档

© Pengfei Ni all right reserved,powered by GitbookUpdated at 2020-08-07 14:01:05

results matching ""

    No results matching ""